Prices incl. VAT plus shipping costs
Out of stock
Delivery time within Germany approx. 7-14 working days
- Order number: 238.0331.138
Conditionally self-priming (up to 0.5m) pool circulation pump BADU 21-80/33 SG We., alternating current version, for use with pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h.
1~230 Volt
Hmax= 16,0 m
Qmax= approx. 80 m³/h
techQ: approx. 74 m³/h
techH: 8 m WS
Pool size: approx. 30 - 100 m³
Power output: 3.00 kW
Inlet Sa / outlet connection Da (G): 2 3/4" / 2 3/4"
Pool size in m³: | 30 - 100 |
Total head H in m WS: | 8 |
Flow rate Q in m³/h: | 74 |
Motor performance in kW (P2): | 3.00 |
Pump casing: | PPE GF 30 |
Gland housing: | PPE GF 30 |
Impeller: | POM GF 30 / PP GF 30 |
Mechanical seal: | carbon / ceramic / NBR |
Screws: | Galvanised steel |
Impeller nut: | PP GF 30 |
Wear ring: | Stainless steel 1.4301 |
Motor shaft: | Stainless steel 1.4057 |
The BADU 21 range pumps are designed for the specific demands of bath tubs, whirlpools, counter swim units and cleaning devices. This special model is a conditionally self-priming (up to 0.5m) circulation pump, which can handle small amounts of air. These pumps are to be installed below the water level or above water level at approximately 0.5m at maximum, in order for the pool water to drain independantly or be sucked in by the pump.
Pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h.
Monoblock-type pump with a bellow-type mechanical seal mounted on a plastic shaft protector sleeve. Complete electrical separation.
Standard terminal box position on the left side. Position on the right side or on top on request.
We recommend sealing the pump suction and pressure line in the thread.
Special motors on request.
The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l.
For higher salt concentrations please contact us.
Also available in AK version