BADU Top S II/14
€495.00
Available, delivery time: approx. 2-4 days
Product information "BADU Top S II/14"
Self-priming filtration circulation pump BADU Top S II/14 for pool sizes of approximately 60-90 m³. Identical connection size and dimension and 100 % interchangeable with Super Pump Swim-tec 14.
1~ 230 V
Hmax: approx. 16,5 m
Qmax: approx. 17,5 m³/h
techQ: 14 m³/h
techH: 8 m WS
Pool size: approx. 60 - 90 m³
Power output: 0.65 kW
Inlet / outlet connection, d (mm): Special union with glue socket 63 / 50
This pump is especially designed for medium-size, above ground pools, partially embedded pools and smaller swimming ponds. Thanks to the large pumping capacity, an automatic pool cleaner can also be attached.
Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level.
Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.
| Pool equipment: | Circulation pump |
| Pool size in m³: | 60 - 90 |
| Filter size in mm: | 610 - 650 |
| Flow rate Q in m³/h: | 14 |
| Total head H in m WS: | 8 |
| Motor performance in kW (P2): | 0.65 |
| Strainer capacity in l: | approx. 3 |
| Strainer basket mesh size in mm: | approx. 3.2 x 2.6 |
| Pool type: | Outdoor pool, Indoor pool |
| Installation: | Built-in pool, Above ground pool |
| Class: | Middle class |
| Pump casing: | PP TV 20 |
| Diffuser: | PP TV 40 |
| Impeller: | PA 66 GF 30 / PC |
| Strainer basket: | PP |
| Mechanical seal: | carbon / ceramic / NBR |
| Screws: | Galvanised steel |
| Intermediate housing: | PP TV 40 |
| Gland housing: | PP TV 40 |
