Filterpump MP 12 Meranus
€440.00
No longer available
Product information "Filterpump MP 12 Meranus"
Self-priming filtration circulation pump Filterpump MP 12 Meranus for pool sizes of approximately 30-60 m³. Identical connection size and dimension and 100 % interchangeable with Swim-tec Super Pump 12.
1~ 230 V
Hmax: approx. 15,5 m
Qmax: approx. 14,5 m³/h
techQ: approx. 12 m³/h
techH: approx. 8 m WS
Pool size: approx. 30 - 60 m³
Power output: 0.45 kW
Inlet / outlet connection, d (mm): Special union with glue socket 63 / 50
This pump is especially designed for medium-size, above ground pools, partially embedded pools and smaller swimming ponds. Thanks to the large pumping capacity, an automatic pool cleaner can also be attached.
Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level.
Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.
| Pool equipment: | Circulation pump |
| Pool size in m³: | 30 - 60 |
| Filter size in mm: | 500 - 610 |
| Flow rate Q in m³/h: | 12 |
| Total head H in m WS: | 8 |
| Motor performance in kW (P2): | 0.45 |
| Strainer capacity in l: | approx. 3 |
| Strainer basket mesh size in mm: | approx. 3.2 x 2.6 |
| Pool type: | Indoor pool, Outdoor pool |
| Installation: | Above ground pool, Built-in pool |
| Class: | Middle class |
| Pump casing: | PP TV 20 |
| Diffuser: | PP TV 40 |
| Impeller: | PA 66 GF 30 / PC |
| Strainer basket: | PP |
| Mechanical seal: | carbon / ceramic / NBR |
| Screws: | Galvanised steel |
| Intermediate housing: | PP TV 40 |
| Gland housing: | PP TV 40 |
Technical modifications subject to change
